Reset zebra printers to defaults

Disconnect zebra from PC.

Restart printer

 1.Press SETUP/EXIT

 2. Press PLUS (+) or MINUS (-) to display the options

 3.select LOAD DEFAULTS

 4. Press NEXT/SAVE to select the displayed choice.

 5. Press PLUS (+) or MINUS (-) to display the save options

 6. PERMANENT

 7. Press NEXT/SAVE

 8 . When the configuration and calibration sequence is done,

PRINTER READY displays.

  9. Restart the printer again and Print configuration labels.

 

Zebra 105 SL Network configuration:

1. Press SETUP/EXIT

2. Press < or > till IP Protocol is on display

3. Press check mark to select it

4. Use + - to find PERMANENT

5. Select Permanent

6. NEXT/SAVE PERMANENT

7. IP ADRESS 192.168.x.xxx

Subnet mask 255.255.255.0

Default Gateway 192.168.x.200

7. NEXT/SAVE PERMANENT

8.  Print configuration labels to check the added IP